Tecofi EVBOBINE Coil for EV1140 / EV1141 Solenoid Valves
The Tecofi EVBOBINE is a coil with connector for Tecofi EV1140 (normally closed) and EV1141 (normally open) solenoid valves. Four codes by voltage: 024AC, 024CC, 048AC and 230AC, 0.16 kg each. For replacing or fitting the coil on these BSP brass solenoid valves.
- Brand Tecofi
- Origin France
- Genuine products
- Full CO/CQ
- VAT invoice
- Quote within 24 working hours
PRODUCT DESCRIPTION
Tecofi EVBOBINE Coil for EV1140 / EV1141 Solenoid Valves
A Tecofi (France) product. Product code: EVBOBINE. Technical data, dimensions and order codes (Ref.) for each size are listed below; contact CAD for sizing advice and a quote.
EVBOBINE
Coil with connector for solenoid valves EV1140 / EV1141
| Kg | Ref. |
|---|---|
| 0.16 | EVBOBINE-024AC |
| 0.16 | EVBOBINE-024CC |
| 0.16 | EVBOBINE-048AC |
| 0.16 | EVBOBINE-230AC |
Compatibility with solenoid valves
- According to the Tecofi catalogue, EVBOBINE is the coil + connector set for the EV1140 and EV1141 solenoid valves.
- EV1140 is a normally closed solenoid valve and EV1141 is normally open; both are pilot-operated diaphragm valves with forged brass bodies and BSP female threads (ISO 228-1), for clear water, hot water, steam and light oils; not for gases and air.
- Tecofi states the EV1140/EV1141 are compatible with most FCDE coils, including ATEX, low-power and IP67 types.
Order codes by voltage
| Code | Voltage (derived from the code) |
|---|---|
| EVBOBINE-024AC | 24 V alternating current (AC) |
| EVBOBINE-024CC | 24 V direct current (CC = courant continu, i.e. DC) |
| EVBOBINE-048AC | 48 V alternating current (AC) |
| EVBOBINE-230AC | 230 V alternating current (AC) |
The EV1140/EV1141 valves themselves cover a wider voltage range (AC 12-24-48-110-230-400 V, DC 12-24-48-110 V), but the EVBOBINE set lists only the four codes above.
Information to send for a quote
- The valve model in use (EV1140 or EV1141) and its DN size.
- The voltage and current type (AC or DC) required for the coil.
- The quantity; if the valve is not an EV1140/EV1141, send the valve model so CAD can check.
TECHNICAL SPECIFICATIONS
Specifications of Tecofi EVBOBINE Coil for EV1140 / EV1141 Solenoid Valves
| PARAMETER | VALUE |
|---|---|
| Model | EVBOBINE |
| Brand | Tecofi |
| Origin | France |
Specifications may vary with the ordered configuration. Contact a CAD engineer for sizing to your actual operating conditions.
FAQ
Frequently asked questions about EVBOBINE
Which solenoid valves is the EVBOBINE for?
According to the Tecofi catalogue, the EVBOBINE (coil with connector) is for the normally closed EV1140 and normally open EV1141 solenoid valves. For other valve ranges, for example the EV6100, send the valve model so CAD can check the right coil.
Which EVBOBINE code should I choose?
Choose by the valve voltage: 024AC (24 V AC), 024CC (24 V DC), 048AC (48 V AC) or 230AC (230 V AC). The coil must match the voltage and current type of the control circuit.
Can another brand's coil be used on the EV1140/EV1141?
Tecofi states the EV1140/EV1141 are compatible with most FCDE coils, including ATEX, low-power and IP67 types. Send the code of the coil you intend to use so CAD can check it before you order.
What should I send CAD to quote an EVBOBINE?
Send the valve model (EV1140 or EV1141) and DN size, the voltage and current type needed, and the quantity. CAD quotes within 24 working hours.
Used this product? Write a review
MORE IN FLOW CONTROL
