Honeywell CN4610A1001 Damper Actuator
Honeywell CN4610A1001 is a direct-coupled damper actuator, 10 Nm, 230 Vac, floating or two-position control, non-spring return, no feedback and no auxiliary switch. 95° rotation, 65 to 140 s runtime for 90°, IP54. For air dampers, VAV units, air handlers and louvers.
- Brand Honeywell
- Torque 10 Nm (88 lb-in.)
- Supply voltage 230 Vac -15%/+20%, 50/60 Hz
- Control floating, non-spring return, no feedback
- Genuine products
- Full CO/CQ
- VAT invoice
- Quote within 24 working hours
PRODUCT DESCRIPTION
Honeywell CN4610A1001 Damper Actuator
- Supply voltage
- CN6105/CN6110 24 Vac/dc -15%/+20%, 50/60 Hz
- CN4605/CN4610 230 Vac -15%/+20%, 50/60 Hz
- Nominal voltage
- CN6105/CN6110 24 Vac/dc, 50/60 Hz
- CN4605/CN4610 230Vac, 50/60 Hz
- All values stated hereinafter apply to operation undernominal voltage conditions.
- Power consumption
- CN6105/CN6110 5 VA / 2 W
- CN4605 22 VA / 2 W at 50 Hz
- CN4610 25 VA / 2 W at 60 Hz
- Ambient limits
- Ambient operating limits -5…+140 °F (20…+60 °C)
- Ambient storage limits -22…+176 °F (-30…+80 °C)
- Relative humidity 5…95%, non-condensing
- Safety
- Protection standard IP54
- Protection class II as per EN 60730-1
- Overvoltage category II
- Lifetime
- Full strokes 60000
- Repositions 1.5 million
- Mounting
- Round damper shaft 3/8 in…5/8 in.
- Square damper shaft 1/4 in…1/2 in.; 45° steps
- Shaft length min. 1-5/8 in.
- End switches (when included)
- Rating Class II
- Triggering points 5° / 85°
- Torque rating 44 lb-in. (5Nm) / 88 lb-in. (10 Nm)
- Runtime for 90°
- CN6105 90 sec (dc / 60 Hz ac)
- CN6110 90 sec (dc / 50 Hz ac)
- CN4605 65…110 s (60/50 Hz)
- CN4610 65…140 s (60/50 Hz)
- Rotation stroke 95° +/- 3°
- Weight (without cables) 1 lbs.
- Noise rating
- 35 dB(A) max. at 1 m
- 40 dB(A) for 230 Vac at 65 sec runtime
- Certification
- CN6105/CN6110 CE & UL
- CN4605/CN4610 CE
Applications and mounting
According to Honeywell’s CN05/CN10 Series product data, the actuator drives air dampers, VAV units, air handlers, ventilation flaps and louvers. The 10 Nm (88 lb-in.) torque suits dampers up to about 20 sq ft (about 1.9 m²) with seal-less blades, depending on air friction.
- Direct coupling to the damper shaft through a shaft adapter: round shaft 3/8 to 5/8 in., square shaft 1/4 to 1/2 in. (45° steps), minimum shaft length 1-5/8 in.
- Mountable in any orientation (the IP54 rating depends on orientation); anti-rotation bracket and a removable access cover for direct wiring.
- Declutch button for manual adjustment with power off; two adjustable mechanical end limits; Service/OFF switch and direction selection (Dir / Rev).
- On power loss the shaft stays in position (non-spring return).
- Lifetime 60,000 full strokes or 1.5 million repositions; noise at most 35 dB(A) at 1 m (40 dB(A) for the 230 Vac model at 65 s runtime).
Reading the code and related models
CN4610A1001 decodes as: C electric motor, N non-spring return, 46 = 230 V ON/OFF supply, 10 = 10 Nm, A standard model, 1 = no feedback, 0 = no auxiliary switches. The same data sheet covers CN4605A1001 (5 Nm, 230 Vac), CN6110A1003 (10 Nm, 24 Vac/dc), CN6110A1201 (10 Nm, 24 Vac/dc, with auxiliary switches) and CN6105A1011 (5 Nm, 24 Vac/dc).
What to send for a quote
- Supply voltage (230 Vac or 24 Vac/dc) and required torque (5 or 10 Nm).
- Damper size, shaft type (round or square, diameter) and shaft length.
- Whether auxiliary switches or position feedback are needed.
- Control type (floating or ON/OFF) and quantity.
CAD replies with a quote within 24 working hours of receiving the details.
TECHNICAL SPECIFICATIONS
Specifications of Honeywell CN4610A1001 Damper Actuator
| PARAMETER | VALUE |
|---|---|
| Model | CN4610A1001 |
| Brand | Honeywell |
| Torque | 10 Nm (88 lb-in.) |
| Supply voltage | 230 Vac -15%/+20%, 50/60 Hz |
| Control | floating, non-spring return, no feedback |
| Runtime for 90° | 65…140 s (60/50 Hz) |
| Rotation stroke | 95° +/- 3° |
| Protection | IP54; Protection class II per EN 60730-1 |
| Operating temperature | -20…+60 °C |
| Certification | CE |
Specifications may vary with the ordered configuration. Contact a CAD engineer for sizing to your actual operating conditions.
FAQ
Frequently asked questions about CAD-EL-232
How does CN4610A1001 differ from CN6110A1003?
Same 10 Nm torque, non-spring return, no feedback and no auxiliary switch. CN4610A1001 runs on 230 Vac, CN6110A1003 on 24 Vac/dc.
What damper size can a 10 Nm actuator drive?
According to the manufacturer, up to about 20 sq ft (about 1.9 m²) with seal-less blades; the real figure depends on air friction.
Does CN4610A1001 have spring return or position feedback?
No. It is a non-spring return model with no feedback and no auxiliary switch; on power loss the shaft stays in position.
How is CN4610A1001 controlled?
Floating or two-position (ON/OFF) control at 230 Vac; the direction of rotation is selected with the Dir/Rev switch on the housing.
What do I need to send for a CN4610A1001 quote?
Voltage, torque, damper size and shaft type, auxiliary switch needs and quantity. CAD replies within 24 working hours.
Used this product? Write a review
MORE IN ELECTRIC CONTROL AUTOMATION
