Honeywell HON 240 Gas Pressure Regulator

Features include:

• Diaphragm casing can be rotated through 360° relative to regulator body (without vent limiting device)
• Rapid response to load changes
• Wide range of interchangeable orifices
• Regulator can be installed in any position
• Can be fitted with integral over-pressure (OPCO) or under-/over-pressure cut-off valve (UPCO/OPCO)
• May be optionally fitted with a safety diaphragm and vent limiting device (VLD) for applications requiring no vent piping per ANSI Z21.80/CSA 6.22.
• Cartridge-type diaphragm and valve assembly for ease of maintenance
• Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry
• Max. inlet pressure pu max: up to 10.3 bar
• Outlet pressure range Wd: 0.01 to 0.21 bar
• SSV setting range
  • Wdo 0.035 to 0.26 bar
  • Wdu 0.01 to 0.03 bar

• Connection: Pipe screw connection R ¾”, R 1″
• Temperature range: 40 to 60°C
• Type available
  • P – without internal Safety Relief Valve (SRV)
  • R – with internal Safety Relief Valve (SRV)
  • LR – internal SRV
  • SD – safety diaphragm

All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.