Maxon OvenPak Industrial Gas Burner
The Maxon OVENPAK® 400 series is a range of industrial gas burners in more than 90 designs and sizes, with heat output up to 16.5 MMBtu/h, 40:1 turndown and clean, low-NOx combustion.
- Heat output up to 16.5 MMBtu/h
- Designs and capacity sizes more than 90
- Turndown ratio 40:1
- Fuel clean gas, low pressure
PRODUCT DESCRIPTION
Industrial gas burner for dryers, ovens and paint lines
The Maxon OVENPAK® 400 series is described by its manufacturer as the most flexible and reliable industrial burner in the world. OVENPAK® burns almost any clean gaseous fuel and needs only low-pressure fuel. It is a natural gas burner for clean, low-NOx combustion with outstanding turndown.
The burner is widely used in ovens and dryers, paint finishing lines, textile and paper machines, food ovens, coffee roasters, grain dryers and fume incinerators. The 400 series comes in more than 90 designs and sizes, including a built-in blower version and a low-cost remote-blower version (EB) that is easy to tune and service in the field.
The attached document is the installation and start-up guide for the Maxon OVENPAK® 400 / 200 burner (edition 4/98).
TECHNICAL SPECIFICATIONS
Specifications of Maxon OVENPAK® 400 Series
| PARAMETER | VALUE |
|---|---|
| Model | OVENPAK® 400 |
| Brand | Maxon |
| Origin | USA |
| Designs and capacity sizes | More than 90 |
| Heat output | Up to 16.5 MMBtu/h (16,500,000 Btu/h) |
| Turndown ratio | 40:1 or higher |
| Fuel | Most clean gaseous fuels (natural gas, propane) |
| Fuel pressure | Low-pressure fuel only |
| Emissions | Clean combustion, low NOx |
| Combustion air | Built-in blower; EB version uses a remote blower |
| Operating voltage | 1 phase, 3 phase, 220 V / 380 V (50 Hz, 60 Hz) |
| Flame monitoring | Flame rod or UV scanner |
| Ignition | Spark ignitor |
| Weight | 100 – 350 lb |
| Installation | Through the furnace wall or an insulated duct, fixed with 4 bolts on the flange |
| Applications | Ovens, dryers, paint lines, textile and paper machines, food ovens, coffee roasters, grain dryers, fume incinerators |
Specifications may vary with the ordered configuration. Contact a CAD engineer for sizing to your actual operating conditions.
MORE IN PROCESS THERMAL
