Honeywell Minipeeper C7035A1080 UV Flame Detector

Features:

• The flame detector is used with RA890G devices or R7249A, R7290A, R7749B and R7849A, B amplifiers and the appropriate Honeywell controls.
• The C7035A has an integral threaded collar (1-11-1 / 2 NPSM internal) for mounting on a 1-inch sight pipe.
• The C7035A housing meets Underwriters Laboratories Inc. requirements for raintight construction and complies with NEMA enclosure standards, types 4 and 4X.
• When properly installed, it is rated for 5 psi pressure.
• The C7035A ultraviolet sensing tube is field-replaceable.
• Flame detectors can be wired in parallel for installations where the flame is hard to sight.

Specifications:

• Flame detection: End viewing.
• Operating temperature rating: 0 ° F to 250 ° F (-18 ° C to + 121 ° C), or -40 ° F to 250 ° F (-40°C to + 121 ° C), depending on model.
• Maximum pressure rating: 5 psi (34.5 kPa).
• Mounting: Collar with 1-11-1 / 2 NPSM internal threads for mounting on a 1-inch sight pipe. (DIN-approved C7035A1064 has 1-11 BSP.P1 threads.)
• Wiring connections: Two 6 ft. (1.83 m), color-coded
  • 18 AWG silicone rubber insulated leadwires, NEC Class 1, rated at 302 ° F (150°C).
  • The back of the detector has 1 / 2-14 NPSM internal threads for conduit connection. The C7035A1080 has 10-foot (3-meter) leadwires rated at 600°F (316°C).