Maxon Series 67 TUBE-O-FLAME Immersion Tube Burner
The TUBE-O-FLAME® natural gas burner improves efficiency in industrial washers, dip tanks, water baths, solution tanks and asphalt tanks.
- Turndown ratio 20:1
- Blower motor voltage (V/phase/Hz) 115/208-230/1/60; 208-230/460/3/60; 575/3/60; 190-200/3/50; 380-415/3/50; 500/3/50 (V/phase/Hz)
- Max. heat output 5,000,000 Btu/hour
- Max. capacity by model (x1000 Btu/hr) 6-08: 800; 8-15: 1500; 10-25: 2500; 10-30: 3000; 12-38: 3800; 14-50: 5000
PRODUCT DESCRIPTION
Maxon Series 67 TUBE-O-FLAME Immersion Tube Burner
MAXON’s TUBE-O-FLAME® industrial burner delivers clean, low-NOx heat for tube firing. TUBE-O-FLAME® burns most fuel gases inside a tube bank, reducing fuel consumption and improving process response. Low horsepower requirements cut operating costs and produce clean combustion with outstanding reliability.
- Burns clean, low-pressure gaseous fuels
- 20:1 turndown capability
- Easy installation with a compact flange design
- Simple start-up and adjustment
- Lower initial and operating costs
- Heat output 5,000,000 Btu/hour
- More than 36 designs and sizes
- 20:1 turndown ratio
- Optional 2-position Hi/Lo control motor
- Cost-saving remote-blower version (LB)
- Blower motor voltage (V/phase/Hz): 115/208-230/1/60; 208-230/460/3/60; 575/3/60; 190-200/3/50; 380-415/3/50; 500/3/50
TECHNICAL SPECIFICATIONS
Specifications of Maxon TUBE-O-FLAME
| PARAMETER | VALUE |
|---|---|
| Model | Series 67 |
| Turndown ratio | 20:1 |
| Blower motor voltage (V/phase/Hz) | 115/208-230/1/60; 208-230/460/3/60; 575/3/60; 190-200/3/50; 380-415/3/50; 500/3/50 (V/phase/Hz) |
| Max. heat output | 5,000,000 Btu/hour |
| Max. capacity by model (x1000 Btu/hr) | 6-08: 800; 8-15: 1500; 10-25: 2500; 10-30: 3000; 12-38: 3800; 14-50: 5000 |
| Versions | Built-in blower, or LB (no blower, uses an external air supply) |
| Control motor | Optional 2-position Hi/Lo |
| Fuel | Clean fuel gases (natural gas, propane) |
| Applications | Immersion tube heating for dip tanks, washers, salt baths, asphalt tanks |
| Brand | Maxon |
Specifications may vary with the ordered configuration. Contact a CAD engineer for sizing to your actual operating conditions.
MORE IN PROCESS THERMAL
