TECOFI CB4449-EA Dual Plate Check Valve, Iron Body, Stainless Plates

CB4449-EA is a Tecofi (France) wafer-type dual plate (double plate) check valve: EN-GJS-400-15 ductile iron body, stainless steel plates and springs, EPDM ACS seat, 16 bar, DN40 to DN600, for hot water, cold water and compatible fluids. This page covers CB4449-EA only; CB3449-EPA has the same design and stainless plates and springs but an EN-GJL-250 cast iron body (DN40-DN500) and also covers DN700 and DN800.

Specifications

• Body: ductile iron EN-GJS-400-15 (GGG40)
• Plates (2): stainless steel GX5CrNiMo 19-11-2 (equivalent to ASTM A351 CF8M / AISI 316)
• Springs: stainless steel GX5CrNiMo 19-11-2 (equivalent to ASTM A351 CF8M / AISI 316)
• Hinge pin and stop pin: stainless steel GX5CrNiMo 19-11-2 (equivalent to ASTM A351 CF8M / AISI 316)
• Bearings: PTFE; plugs: stainless steel; eye bolt (DN200 and larger only): carbon steel
• Seat: EPDM ACS
• Connection: wafer, between PN10/16 flanges (EN 1092-1, ISO 7005-1) / ASME B16.5 Class 150
• Size range: DN40 đến DN600
• Max. working pressure: 16 bar; back pressure for sealing: 2 bar
• Working temperature: +5°C / +110°C

Dimensions, weight and order codes

L is the face-to-face length (column B of the datasheet). A “—” means the order code of that size is not in CAD’s current list; contact CAD to check.

Difference from CB3449-EPA

• EN-GJS-400-15 (GGG40) ductile iron body at every size; CB3449-EPA uses EN-GJL-250 (GG25) cast iron at DN40-DN500.
• Range DN40 to DN600; CB3449-EPA goes up to DN800.
• Weight per size differs from CB3449-EPA (for example DN100: 4.38 kg against 4.85 kg).
• Same 316 (CF8M) stainless plates, springs, hinge and stop pins, EPDM ACS seat, 16 bar and +5°C / +110°C as CB3449-EPA.
• The datasheet also carries a table of resistance coefficient, Kv/Cv and minimum opening pressure per size; ask CAD if you need it for head-loss calculations.

Applications

The datasheet names pumping, water supply, air conditioning and heating, chemical industry and hydraulic installations. Fluids: hot water, cold water and compatible fluids. Suited to unloaded fluid transfer under regular, non-pulsating conditions.

Standards / Approvals

• Design to EN 16767; meets the requirements of the Pressure Equipment Directive 2014/68/EU (module H).
• Face-to-face length to EN 558 series 16.
• Mounting between PN10/16 flanges to EN 1092-1 and ISO 7005-1, in line with ASME B16.5 Class 150.
• Hydraulic tests to EN 12266-1, DIN 3230 and ISO 5208: body 24 bar, seat 17.5 bar.
• Body coating: epoxy powder RAL 5015, 250 microns, corrosion protection class C5 (medium durability, C5M) following NF EN ISO 12944.
• The Product approvals section of the datasheet lists: Health compliance certificate no. 19 ACC LY 532.

Installation

• Can be mounted on horizontal or vertical pipework; the arrow on the body shows the flow direction.
• For horizontal mounting the valve axis must be vertical; for vertical mounting the flow is upward.
• Keep a straight run of 3 to 5 times the minimum diameter upstream and downstream of an elbow or appliance to stay out of turbulence that increases wear.
• At a pump discharge, follow FD CEN/TR 13932.

What to send for a quote

• Product code or order code (for example CB4449-EA0100)
• DN size (mm) and flange standard (PN10, PN16 or ASME Class 150)
• Fluid, working pressure and temperature, mounting position (horizontal or vertical)
• Quantity

CAD replies with a quote within 24 working hours.

Technical documentation (datasheet)

• Datasheet CB4449-EA