TECOFI CA1100 Brass Spring Check Valve
CA1100 is a Tecofi spring-loaded axial BSP check valve: CuZn39Pb2 copper alloy body, nitrile + plastic disc, DN10-DN100, 12 / 10 / 8 bar by size, -20°C to +100°C, for water, building services and fuel pumping.
- Brand Tecofi
- Origin France
- Body Copper alloy CuZn39Pb2 (body and bonnet)
- Disc Nitrile + plastic
- Genuine products
- Full CO/CQ
- VAT invoice
- Quote within 24 working hours
PRODUCT DESCRIPTION
TECOFI CA1100 Brass Spring Check Valve
CA1100 is a Tecofi (France) spring-loaded axial BSP threaded check valve (standard type) with a CuZn39Pb2 copper alloy body and bonnet, nitrile and plastic disc, stainless steel spring, DN10 (3/8″) to DN100 (4″), maximum working pressure 12 / 10 / 8 bar depending on size, for water, building services and fuel pumping. This page covers CA1100 only; CA1142 is an axial check valve with a CW617N brass body, a PA + ABS disc and 16 bar at every size.
Specifications
- Body: copper alloy CuZn39Pb2 (ASTM B124 C37700, BS 12164 CZ121)
- Bonnet: copper alloy CuZn39Pb2 (same standards as the body)
- Disc: nitrile + plastic
- Spring: stainless steel
- Connection: BSP thread to ISO 228-1
- Size range: DN10 (3/8″) to DN100 (4″)
- Max. working pressure: 12 bar (DN10-DN25, 3/8″ – 1″); 10 bar (DN32-DN50, 1″1/4 – 2″); 8 bar (DN65-DN100, 2″1/2 – 4″)
- Working temperature: -20°C / +100°C
- Horizontal or vertical mounting; low head loss, silent operation
Dimensions, weight and order codes
| DN (mm) | DN (inch) | L (mm) | Kg | Ref. |
|---|---|---|---|---|
| 10 | 3/8″ | 46.5 | 0.09 | — |
| 15 | 1/2″ | 48.5 | 0.12 | — |
| 20 | 3/4″ | 51.5 | 0.18 | — |
| 25 | 1″ | 59.5 | 0.25 | — |
| 32 | 1″1/4 | 67.5 | 0.37 | — |
| 40 | 1″1/2 | 72 | 0.49 | — |
| 50 | 2″ | 82 | 0.76 | — |
| 65 | 2″1/2 | 95 | 1.42 | CA1100-0065 |
| 80 | 3″ | 99 | 1.95 | CA1100-0080 |
| 100 | 4″ | 111.5 | 3.00 | CA1100-0100 |
L is the overall length. A “—” means the order code of that size is not in CAD’s current list; contact CAD to check. The CA1100 datasheet gives sizes in inches; the DN (mm) column is the matching conversion.
Difference from CA1142
- CuZn39Pb2 copper alloy body and bonnet; CA1142 uses CW617N brass.
- Nitrile + plastic disc; CA1142 lists a PA + ABS disc with a flat NBR gasket.
- Maximum working pressure falls with size (12 / 10 / 8 bar); CA1142 is 16 bar at every size.
- Size range starts at DN10 (3/8″); CA1142 starts at DN15.
- Overall length and weight from DN65 up differ from CA1142 (for example DN100: 111.5 mm and 3.00 kg against 114 mm and 3.11 kg).
- The CA1100 datasheet states horizontal or vertical mounting; CA1142 states any position.
Applications
The datasheet names general uses: water distribution, building services, fuel pumping and pumping in general.
Standards / Approvals
- BSP thread to ISO 228-1.
- Pressure test to EN 12266-1, DIN 3230, BS 5154 and ISO 5208: body PS x 1.5; seat PS x 1.1.
- The CA1100 datasheet (Rev. K, 2012) does not state a certificate.
What to send for a quote
- Product code or order code (for example CA1100-0080)
- DN size or thread size (inch)
- Fluid (water or fuel), working pressure and temperature, mounting position
- Quantity
CAD replies with a quote within 24 working hours.
Technical documentation (datasheet)
TECHNICAL SPECIFICATIONS
Specifications of TECOFI CA1100 Brass Spring Check Valve
| PARAMETER | VALUE |
|---|---|
| Model | CA1100 |
| Brand | Tecofi |
| Origin | France |
| Body | Copper alloy CuZn39Pb2 (body and bonnet) |
| Disc | Nitrile + plastic |
| Connection | BSP thread (ISO 228-1) |
| Size range | DN10 (3/8") - DN100 (4") |
| Working pressure | 12 bar (DN10-DN25); 10 bar (DN32-DN50); 8 bar (DN65-DN100) |
| Working temperature | -20°C / +100°C |
| Spring | Stainless steel |
Specifications may vary with the ordered configuration. Contact a CAD engineer for sizing to your actual operating conditions.
OTHER CODES IN THE RANGE
Same series
FAQ
Frequently asked questions about CA1100
How does CA1100 differ from CA1142?
CA1100 has a CuZn39Pb2 copper alloy body, a nitrile + plastic disc, DN10-DN100 and a maximum pressure of 12 / 10 / 8 bar depending on size. CA1142 has a CW617N brass body, a PA + ABS disc, DN15-DN100 and 16 bar at every size.
What is the maximum pressure of CA1100?
12 bar for DN10-DN25 (3/8" - 1"), 10 bar for DN32-DN50 (1"1/4 - 2") and 8 bar for DN65-DN100 (2"1/2 - 4"); working temperature -20°C to +100°C.
Which sizes does CA1100 come in and how does it connect?
The datasheet gives 3/8" to 4" (DN10 to DN100) with BSP threads to ISO 228-1, horizontal or vertical mounting.
Which fluids is CA1100 for?
The datasheet names general uses: water distribution, building services, fuel pumping and pumping in general. For a specific fluid, send the details to CAD for advice.
What is needed to quote CA1100?
Send the code or DN size, the fluid, pressure, temperature and quantity. CAD replies with a quote within 24 working hours.
Used this product? Write a review
MORE IN FLOW CONTROL
